Carbon Dioxide in Spacecraft and NASA-STD-3001
Every crew member exhales carbon dioxide continuously. In a sealed cabin it accumulates unless the life support system removes it, which makes CO2 control a constant design load rather than an occasional concern.
What NASA-STD-3001 is
NASA-STD-3001 is NASA's spaceflight human-system standard. Volume 2 covers human factors, habitability and environmental health, including the atmosphere limits that crewed vehicles must meet.
The CO2 limit
NASA's technical brief on Revision D states that average carbon dioxide partial pressure in the habitable volume, over one hour, must not exceed 3 mmHg. Earlier requirements accepted a range of 3.8 to 7.5 mmHg. The SOMA reference mission uses the same 3.0 mmHg hourly limit from Volume 2, Revision F.
Why the limit tightened
NASA reports an association between crew headaches and CO2 levels, with headaches at roughly 2.8 to 4.5 mmHg and worsening with higher levels, along with fatigue. The diagnosis is complicated in spaceflight, because headaches and vision changes are also linked to fluid shifts in microgravity.
How spacecraft remove CO2
- Lithium hydroxide absorbs CO2 and is consumed in the process. Apollo suits used it.
- Regenerable sorbents capture CO2 and release it later so the bed can be reused. This is the approach of the ISS Air Revitalization System and of the Rapid Cycle Amine system in modern suit designs.
- CO2 reduction goes a step further. A Sabatier reactor combines CO2 with hydrogen to make water and methane, recovering part of the oxygen.
What the limit means for design
A lower limit raises the performance needed from every part of the air loop: sorbent capacity, airflow, power and heat. NASA reports that its upgraded carbon dioxide removal hardware has allowed lower CO2 levels on the ISS, improving crew health.